Belépés Facebookkal
[ Ablak bezárása ]
Do you like the Kroma series by Innokin? In this article, let's look at their latest Kroma-Z Kit. It is available for pre-order now in vapesourcing online vape store, don't miss out if you are interested.
Innokin Kroma-Z is the newest release in the "Platform" range designed in collaboration with Phil Busardo and the Vaping Greek. The Platform range usually cater to MTL vapers, however, this kit also provides a Restricted DTL vape too. We tell you all about these terms in our Guide To Vape Styles. The main feature which ties the Kroma Z in with the Platform series is that it is compatible with the entire Z coil range. A compatibility chart is shown below. A new 0.3ohm R-DTL coil has been released too. The pod is retained in the mod using a magnetic connection plus a locking tab. A side-mounted fill port is provided for refilling. On the mod is an airflow control slider to set the airflow to your preference. Also, there are 3 different drip tip options to tailor the vape to suit.
The base of the coil has a small adjustment ring which is turned by moving the airflow slider. Included in the kit is another adjustment ring for MTL vapers which has a smaller inlet hole. The option of a 510 adaptor means you can use the mod with other tanks turning it into a Box Mod. Looking at the mod itself now this has a 3000mAh internal battery which is charged at a 1.7A rate with the USB Type C cable. A smart system recognizes the coil resistance installed and suggests a suitable wattage setting. However, you do have full Variable Wattage control from 6-40W. The side of the device features a color screen but the type and size are not stated. Styling-wise this follows previous Kroma devices being made of Magnesium Alloy and with a side firing bar.
You may also like:
suorin air cheap
rdta aegis boost
If you are a fan of the SMOK devices, then you must be no stranger to the SMOK Novo series. This time we'll be covering the Novo X Kit in this line, let's dive in for more details.
SMOK Novo X is a 25W draw-activated pod system with an 800mAh battery, wattage adjustment options, a 0.49" OLED screen, and 2ml pods developed specifically for MTL vaping. You'll just inhale to activate the firing mechanism, and it has a simple single-button design. You can use the button at the base of the device to turn your Novo X Vape on and off and to adjust the output power. Just press the button two or three times to activate power adjustment and change the wattage from 1-25W. The 0.49" OLED display screen is a new feature for the Novo series and will display key vaping data, including your wattage setting, battery status, pod resistance, and current. While charging your Novo X, the charging status will also be displayed on this screen. Included in the Novo X is a suite of safety protections that include an 8-Second Draw cutoff, short circuit, and low voltage protection, and lithium-ion battery protection. You'll also find that the Novo X has atomizer recognition, making it simple to just start vaping once you attach a pod.
Included with the Novo X Kit are two 0.8 ohm Novo X DC Pods, each with a 2ml capacity and dual coil (DC) construction, designed for MTL vape styles. Differing from the Novo 3 pod cartridge, the Novo X Pods have a two-way U-shaped airflow channel that helps provide maximum airflow and a smooth, comfortable throat hit with delicious, dense flavor. Recommended for use at 12-25W. The Novo X is only compatible with authentic Novo X Pods and will not work with other types of vape pods or coils. Original Novo and Novo 2 pods are not compatible with the Novo X. To fill your Novo X Pod with e-liquid, remove the pod from your Novo X device. Locate the rubber plug on the side of the pod and lift carefully to open your pod. Fill your pod with e-liquid, then press the rubber plug back into place firmly to seal your pod back up.
You may also like:
manto max review
smok nexmesh coils
The Nord series by SMOK is really famous in the vaping world. This time I'm gonna introduce the Nord X Kit, you can get it from the vapesourcing online vape store if you like. Let's dive in for more details.
SMOK Nord X Kit is the new addition to the Nord range of pod mods. The original Nord was an absolute beauty – I own 2 of them and the Nord 2 seemed to get even better! So what is the Nord X all about… So on the original Nord kit, you could not adjust the output. On the Nord 2 device, you got a screen and adjustable output from 1-40W. The Nord X again has a screen – and the wattage is variable between 5-60W. The internal battery has the same capacity as the Nord 2 at 1500mAh which you can recharge via the UBS Type C port at up to 1.2A charge rate in 75 minutes.
Design-wise this looks very much like the rest of the Nord range but this time it is IP67 Waterproof, dustproof and shockproof. There are 2 different pods included in the kit and they are compatible with different coil ranges: RPM pod – this is compatible with the existing RPM coil range and a 0.4ohm Mesh coil is installed, RPM 2 pod – this is compatible with the RPM 2 range of coils and a 0.16ohm Meshed coil is installed. The pods are refillable and you can just replace the coils without discarding the entire pod.
You may also like:
nord 2 price
odin mini review
If you are looking for reliable and cheap vape pods for sale, then you may wanna check out the SMOK Nfix Kit in this article. Here are more details about it.
SMOK Nfix Kit takes powerful portable vaping to a new level. A 25W pod vape with a 700mAh battery and 3mL pod capacity the Nfix is the perfect portable kit. The super sleek design measures just 110mm x 21.5mm x 13mm it will happily slip into the smallest of pockets. The Nfix uses Type-C USB charging to fully charge the battery in 60 minutes, so you can spend less time charging and more time vaping. On the front is a small OLED screen that clearly displays all your data. Below the screen is the power button which can also be used to adjust the wattage. A new chipset in the Nfix has intelligent pod recognition (which indicates new pods might get released in the future), 8-second cut-off, short-circuit, and low battery protection features.
The real star of the show is the 3mL Nfix pod. Made from translucent PCTG it has four airflow inlets, two on the side of the pod travels downwards to the coil. The other two on either side of the mod channel air directly to the base of the coil which enhances flavor and creates a richer, fuller vapor. Inside the pod is a dual 0.8ohm coil which has been designed to be the ultimate MTL vape with the highest quality flavor. Refill ports are on the side to minimize leakage and the pod is firmly held in place by two strong magnets on the base of the pod. Interestingly SMOK have flipped the fill port in comparison to their other pod mods, now the stopper opens at the top rather than the bottom.
You may also like:
nord 2 price
smok rpm160 cartridge
Although the vaping world is besieged with pod vapes at present, some manufacturers still try to bring something different. The latest Scar Mini Kit by SMOK is a good proof of this, and here are more details about it.
SMOK Scar Mini Kit looks like a hybrid offspring of the Geekvape Aegis Legend and the SMOK AL85… Looking first at the mod – you can see this has taken on the Scar 18 styling whilst using the form factor of the AL85. To keep the mod body as small as possible the removable 18650 battery slightly protrudes from the top of the mod – which is then covered with a removable battery cover cap. A variable wattage output of 1-80W means there should be enough power for most styles of vaper.
The mod is IP67 Waterproof, Shockproof and dustproof to follow the Scar rugged tradition. On the side of the mod is the 0.69in OLED screen which is surrounded by the fire and adjustment buttons. Looking at the tank now – this is the TFV9 Mini – there are 2 capacity options – 3ml (standard) and 2ml (for TPD regulated areas). The kit includes 2x V9 Meshed 0.15ohm coils. On the top of the tank is the swivel childproof top fill cap.
You may also like:
smok rpm80 price
orion q ultra coils
Do you like the vape mod kits by SMOK? This time they are back with their latest Rigel Kit, here is more details about it.
Thanks to refreshing back design, the SMOK Rigel Kit is constructed with a flexible rubber coating with carbon fiber on the side to make it tough, yet have a smooth hand feeling. With 230W of power, it responds to firing within just 0.001s. Power is gained from dual 18650 batteries which should last quite some time, even at maximum output. And, the charging system consists of a USB Type-C interface that delivers reliable power and fast transfer speed. Best of all, multiple protections avoid any risk from vaping on this device. On the control face of the Rigel, you will see a massive 0.96″ full-color display screen with vape data. While this already permits crystal clear viewing of vape data, you may also personalize the user interface to your preference by simultaneously pressing the fire key and the up button.
As for the TFV9 Tank, it operates with V9 coils with mesh heating elements. These types of coils have a bigger heating surface and also heat faster to enhance flavor and vapor. With purchase, you will receive two V9 meshed coils that work in the range of 40-90W. Best of all, you may even install V8 baby coils inside the Rigel Kit, so the entire setup is quite versatile. And, two massive air slots at the bottom are also fully adjustable to further add to the massive vapor production of this tank. Additionally, the tank features a sliding top fill system which means adding juice via a leak-free slot is easier than ever. To refill, you simply slide the top cap to expose a juice port that you may add e-liquid through. Best of all, the juice capacity of the tank is 6.5mL, unless you are located where the maximum capacity is regulated to 2mL.
You may also like:
voopoo drag max review
aegis hero price
Vapesourcing give you best vape starter kit
